Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuse block convert to mini-spade 200 1981

posted by  vvpete on  Sat Aug 3 17:18 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 10 14:10 CST 2014
[RELATED]

That is some nice work, have considered it myself before.

The 'issue' is with moisture in the semi-enclosed fuse area as you point out. Unfortunately all the nice solder work isn't what helped, but the spray coating.
That could work on a complete set of OE fuses and stock fuseholder, as it's the contact points that are going to fail with corrosion from moisture. Even with the fancy new blade fuses.

It would be good to put the whole fuseblock into a zip-loc baggie, and leave everything OE intact.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 6 Fuse block convert to mini-spade [200]
posted by  KarlWalter  on Sat Aug 3 11:28 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.