Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C installation on a PV444 444-544 1957

posted by  planetman on  Sat Sep 14 12:56 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

AFAIK, no one ever made a commercially available A/C compressor brackets for a B16 engine. So you will probably have to 1 made. FYI, make sure the A/C parts aren't going to interfere with hood hinge arms.

There are double groove pulleys available, but they came with a Judson supercharger kit made for the B16. If necessary, there are shops that can fabricate a pulley.

If you are going to convert to 12 volts then all the rest of the pieces can be had from a place like Vintage Air.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C installation on a PV444 [444-544][1957]
posted by  6419dick  on Fri Sep 13 18:22 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.