Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2017 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240-1990 Installed new bearing. Now I have uneven rotation. 200

posted by  Swedish Baklava on  Tue Oct 8 07:06 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi Larue,

I slowly tightened the castle nut to 41 ft lbs as turning the hub slowly and then back off 1/2 turn as the Bentley manual suggested. There was no play or noise at that point.

It was making a weird noise with slight play/vibration when I put my disc rotor back on the hub. I figured that the rotor is holding only by two bolts and thus turning not smoothly and making noise. I put back on my wheel, turned the wheel few times, and shook it for while. It's running fine for now.

Good luck.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240-1990 Installed new bearing. Now I have uneven rotation. [200]
posted by  Larue  on Sun Oct 6 11:54 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.