Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

rear end of cam shaft seal or bearings or what? 200 1988

posted by  TONY H on  Fri Dec 20 14:47 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 16:39 CST 2014
[RELATED]

It sounds to me that what you are seeing might be just burnt oily film on the Cam and not an additional part at all.
There is the 'last' Cam bearing and that is it until this Rubberised Puck. The puck is the seal that keeps oil from escaping out of the Head.
Not sure why DAKAR09 sounds so angry when you are just trying to understand what we are saying and we are trying to understand what you are asking. sheesh


--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.lyse.net/brox/TonyPage4.html http://cleanflametrap.com/tony/






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rear end of cam shaft seal or bearings or what? [200][1988]
posted by  tbb2 subscriber  on Fri Dec 20 00:21 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.