Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel Line - Pump/Filter To Engine 200 1983

when replacing the plastic line with 5/16" braid carefully cut the plastic line just flush with the end of the barb on the metal fitting, leaving the piece of plastic line intact over the barb. install the rubber line over it and the piece you left in place will make up the difference between the 8mm and the 5/16. after clamping it down you will have a long lasting repair.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Fuel Line - Pump/Filter To Engine [200][1983]
posted by  whitedavidp  on Fri Mar 28 19:59 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.