Volvo RWD S90-V90 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2024 S90-V90 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

how to reconnect lines to heater core? S90-V90

Hi all,

I got a little stupid and didn't pay attention to how the lines to the heater core were connected. Does the line with the heater valve connect to the top stub or bottom? Looking at the best diagrams I can find, which show no heater valve, I have the lines hooked up correctly. The line connected to the stub at the rear of the block is the one with the valve and is connected to the lower stub on the heater core.

I have heat and the input line is hot, but, the return line is not hot, even after letting the engine idle for 20 minutes.

Thanks for any help.

Scott








  REPLY TO THIS MESSAGE    PRINT   SAVE 

how to reconnect lines to heater core? S90-V90

The hose from the heater valve goes to the bottom connection on the heater core.
I just went out and looked at my 98 V90.

Jimo








  REPLY TO THIS MESSAGE    PRINT   SAVE 

how to reconnect lines to heater core? S90-V90

Thanks so much. Looks like I'm in good shape. Have to take pix next time.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

how to reconnect lines to heater core? S90-V90

Got the rest of my stupid figured out. Have to bleed the cooling system with the cap off, or the air won't have anywhere to go.

Thanks, all is well







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.