Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Air Intake boot holes solved 200

I found it at my local true value.. I'm sure you could get your hardware store to carry it, if they don't already. Very nice though.
Of course, I cleaned the boot with window cleaner and made sure it was nice and warm.. But the tape feels like it's got some silicone in it. Easy to do one unbroken wrap. Stupidly, I didn't. Don't think it's going to be a factor tho'.
But, I'd recommend starting from the top and just working your way down in one strip. Obviously like wrapping a pipe. I almost considered wrapping each of the ends with a srtip of gorilla tape, but it didn't look like it needed it. Now, it looks and feels re-inforced. No word on long term yet, but you get so much of that tape, you could do it a few times...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 Air Intake boot holes solved [200]
posted by  B0RK ^3 subscriber  on Tue Nov 18 11:16 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.