Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

update II 200 1987

posted by  Swedish Baklava on  Tue Sep 15 07:03 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:40 CST 2014
[RELATED]

Hi All,

Lately, my car didn't smell right when it was running. So I looked around and found that the driver side, top inner valve started to leak. The cap was dangling but it didn't fall out. The fluid leaked very tiny amount but I guess that was the smell. I cleaned with brake cleaner. The valve bolt wasn't loosen like the other side, gave another 10 degree turn. Let's see how this works out.

From the start, maybe I didn't tight enough when I flushed the brake fluid. Or do they back off because constant brake slamming on BQE & LIE?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New re: 87 245 auto - missing brake valve cap [200][1987]
posted by  Swedish Baklava  on Wed Aug 6 20:46 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.