Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rough engine after head gasket replacement 200 1987

posted by  USMA on  Thu Dec 17 09:53 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 3 13:50 CST 2014
[RELATED]

Good news! She runs smoothly.. Just stalls once in a while when decelerating... This seems to have happened before the head gasket!
Just to recap.. It seems that both #2 and #3 injectors were not firing due to the wires inside the connectors had backed out. This was found by the test to listen to each injector using a long screw driver. I took all the connectors apart and reseated the wires in the connectors.
Thanks
Roger






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rough engine after head gasket replacement [200][1987]
posted by  USMA  on Tue Dec 15 18:01 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.