Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

b23 to b230 (non turbo) 200

posted by  Volvo From Heck on  Tue Jul 12 12:23 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

I can at least answer your distributor question. Apparently you are installing a B230 from a 740/940 series into your 245. You can use your distributor (there's no room for the "rear of head mounted distributor". You will likely have to use a part--the auxiliary shaft--from the B23. If you remove the pressed in metal plug at the front distributor platform you will see if the B230 aux. shaft has a gear on it. If not--you'll need the B23 shaft. If the new motor is very late it may have round tooth timing gears -- keep them all the same. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New b23 to b230 (non turbo) [200]
posted by  stnr421  on Tue Jul 12 09:31 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.