Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1989 240 starter not turning over 200 1989

posted by  Onkel Udo II on  Thu Jan 19 10:59 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

To be clear what happens in KPI, KPII and KPIII?

KPI should be "nothing" but retained power items item (dome light, glove box, etc)
KPII adds radio, blower motor, etc
KPIII even if it does not start should turn OFF some items like the headlights

My guess is that since this the initial start functioned (KPIII) and it ran in KPII and would not stop running once moved to KPI it will fail the one or more of the three positions because the actual ignition switch (not the cylinder/tumbler) is either the wrong one for that year or faulty...or I guess it may not have been screwed tightly to mechanical portion.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1989 240 starter not turning over [200][1989]
posted by  tigger-s10  on Thu Jan 19 08:39 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.