Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 volvo 240 with ABS 200 1993

posted by  machine man on  Fri Mar 29 16:40 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:40 CST 2014
[RELATED]

Hi,

I guess you will have to trust them, to know, that the year car has the vented rotors on them are not.

On these upper years of the 240’s, I think they all came with vented rotors. The rears only do not!

Not sure if ABS has anything special going on inside the calipers, from that, of the non-ABS.
I think the master cylinders are the same unless you back to those without the fluid level sensors.
The ABS Actuation block is in the middle with the pulse driven bypass valves.

PRESSURE is PRESSURE but squeezing and squashed are different! (:)
Squashed is done with the brake pedal! Isn’t it? (:)

Phil






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 1993 volvo 240 with ABS [200][1993]
posted by  oak_lee  on Fri Mar 29 15:24 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.