Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A new thread on holding the crankshaft still

posted by  aleekat on  Wed Apr 17 10:54 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:19 CST 2014
[RELATED]

From the FAQs:

Method 4: Jamming the Ring Gear. [Not Recommended and NOT for LH2.4 cars, Rex/Regina cars, or any car with a crankshaft sensor] Some have suggested jamming the ring gear with a screwdriver or tire iron. DON'T DO THIS: several anecdotes of ruined torque converters, ring gears, and ring teeth have been reported. Any damage to the crank position sensor ring will cause your engine to misfire or stop. Repair is difficult.

I'll stick to the "Rope Method".
--
Post Back. That's whats makes this forum work.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A new thread on holding the crankshaft still
posted by  Volvo From Heck subscriber  on Wed Apr 17 09:04 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.