Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

master cylinder only half working 1800 1972

posted by  planetman on  Sat Apr 27 16:06 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Not that it would affect the bleeding, but it is recommended to remove the brake warning switch in the distribution block that the 2 brake lines from the master cylinder go directly to. If you don't removed the switch, you can damage the switch while bleeding the brakes.

There are brake pressure limiters(proportioning valves) for the 2 rear calipers mounted under the car and the 2 brake flex lines screw directly into them.

The proportioning valves can be stuck or clogged and/or the rear brake hoses could be bad, both of which can cause bleeding problems.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New master cylinder only half working [1800][1972]
posted by  kuducalyx  on Sat Feb 9 13:50 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.