Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

93 240 hot start issue 200 1993

posted by  Art Benstein on  Wed Oct 2 05:47 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

You should start by measuring the fuel pressure. The spec is something like 20psi after 20 minutes rest. Numbers not as critical as understanding the rail needs to retain fuel pressure to prevent the heat soak in the engine compartment from pushing all the fuel back toward the tank leaving nothing but vapor in the main pump. Pump can't move vapor.

There are other possibilities but that's always #1 starting point. Fuel pressure.
--
Art Benstein near Baltimore

"Well, here we are, Mr. Pilgrim, trapped in the amber of this moment. There is no why." -KV






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

1 93 240 hot start issue [200][1993]
posted by  Burco subscriber  on Wed Oct 2 03:14 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.