Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2018 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacement torx screw for Regina coil 700 1990

posted by  Will740turbo on  Thu Dec 12 14:43 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 16:09 CST 2014
[RELATED]

I'm slowly (glacially) bringing my late friend's 740 up to daily driver reliability.

Someone lost 2 of the 4 screws that hold the Regina coil pack into the receiver portion of it. They're a really coarse thread and about 3 inches long. Does anyone know what the right thread size and pitch is for them? They almost look like deck screws, but they aren't.

Cheers








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Replacement torx screw for Regina coil 700 1990

    posted by  Chris Mullet on  Thu Dec 12 20:44 CST 2019
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 09:08 CST 2014
    [RELATED]

    I only remember having to remove two screws, caddie cornered from each other, in order to open the coil pack. I don’t recall for sure but I wanta say the other two corners were just locating pins pressed in. But it’s been a long time since I operated on one.

    If you need parts for the Rex coil my understanding is that Jeeps from the same era used the same coil, increasing you possibilities at the junk yard.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.