Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2024

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I added a USB outlet on the face of the ash tray in our 940's

posted by  rstarkie on  Fri Feb 7 15:44 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

When I installed dash cams in our 940's I needed to add an additional USB port. I had previously used a plug in on the cigarette lighter for a single USB source.

I found numerous dual port USB outlets available on Amazon. I was able to use a die grinder to cut away a portion of the ashtray and install the outlets after using a hole saw on the face.

The bonus was that I now have a small digital voltmeter available to monitor the electrical system. I need to cut the cover off because it is useless when anything is plugged in.




--
Any twenty minute job is just a broken bolt away from a three day ordeal






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 I added a USB outlet on the face of the ash tray in our 940's
posted by  rstarkie subscriber  on Fri Feb 7 15:44 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.