Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2003 1800 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Interior--Arm Rest on '68 1800S 1800

posted by  votx on  Sat Jan 16 09:24 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:48 CST 2014
[RELATED]

I need to make all new interior for my '68 1800S. I have an industrial sewing machine and in the past have made a few sets of seat upholstery, door panels & headliners for 544's & 122's. So I don't think I'll have a problem doing the 1800, except the arm-rest has me somewhat puzzled. The original ones seem to be covered with a thin foam, then a vinyl over the foam. The vinyl does not have the cloth backing like typical upholstery vinyl, which makes me suspect that a heat/and vacuum process might have been used to make it conform to the shape & compound curves of the hard plastic inner piece. If anyone has any experience doing this or can offer any helpful ideas I'd be grateful.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Interior--Arm Rest on '68 1800S 1800

posted by  planetman on  Sat Jan 16 13:32 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

$555.00

--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.