Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2017 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rusted out float on P1800 Smiths Fuel Sender 1800 1964

posted by  Ron Kwas on  Thu Jan 21 08:26 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:03 CST 2014
[RELATED]

JG;

Repair looks good!

What was material of the original float that it was "rusted" and couldn't be repaired? Before installation, I suggest lubing Slider on Resistance wire with some Mobil 28 synthgrease (lubes contact area to minimize wear of R-wire, but is easily displaced by Slider so does not interfere with contact).

Remember when installing in Tank: Sender to Tank, and Tank to Chassis must have good elec connections...they are the return current path for Fuel Gauge...poor connection(s) in this path results in a generous/nonlinear gauge!

See also: https://www.sw-em.com/Fuel%20Gauge%201800%20Notes.htm

Cheers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rusted out float on P1800 Smiths Fuel Sender [1800][1964]
posted by  jgcoutts  on Wed Jan 20 20:46 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.