Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2024 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20 in '59 PV544 444-544

posted by  planetman on  Fri Mar 24 13:06 CST 2023
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Unfortunately, you can't install the B18 crossmember because the B16 idler arm for the steering is mounted to the B16 crossemember. When Volvo updated the 544/P210 for the B18, 1 of the changes was to move the idler arm to the right frame rail.

IIRC, you can use the B16 motor mount brackets, but you'll have to slot the mounting holes in the crossmember.

It's easier if you use the motor mount brackets from a B18 544/P210.

FYI, although it's hard to tell and they usually aren't marked, the motor mount brackets aren't the same side to side.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20 in '59 PV544 [444-544]
posted by  jchonig  on Thu Mar 23 07:37 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.