Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2023 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Looking to Buy: SU HIF6 individual heat shields 140-160

Looking to buy individual heat shields for SU HIF6 carbs.








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Looking to Buy: SU HIF6 individual heat shields 140-160

    BUILD THEM. You want a short one that covers the exhaust, & a long one that covers the entire distance forwards of the radiator to nearly rubbing the firewall(and bonnet)

    Stainless would be best covering the exhaust, Aluminium best from Radiator to Firewall. Good Plastic or Phenolic spacers sandwich in between, A nice big radius where the balance tube meets the number 2+3 runners inside the intake & that part is good to go. I recommend BBB needles for HIF6 SU's on economy/mild motors & a K cam or similar 4° ADVANCED. The engine pipe should be set to a 3:4 ratio & a quality 2.125" or 2.25" exhaust. (B20E 130BHP SAE equipped cars had HIGH QUALITY 2.125" Exhaust systems)

    Cheers,
    B20Paul.









  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Looking to Buy: SU HIF6 individual heat shields 140-160

    I have 'em. If interested call me at six-three-one 968-8933 in the evening (I'm on Long Island) -- or write to fastforwardphoto(AT)yahoo(DOT)com ---Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.