Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1985 Volvo Wagon Exhaust Manifold Down Pipe Heater Gasket 200 1985

posted by  rstarkie on  Sat Feb 17 19:27 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

You might check to see how close to parallel the mating surfaces are to each other. With the rest of the exhaust system in place you would find it difficult to pull those surfaces into place simply by tightening the nuts.

It would not be an easy task but you might need to see what you can do to get those two surfaces aligned properly before adding the gasket and nuts.
--
Any twenty minute job is just a broken bolt away from a three day ordeal






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 1985 Volvo Wagon Exhaust Manifold Down Pipe Heater Gasket [200][1985]
posted by  Habib  on Sat Feb 17 17:05 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.