hate to expose my ignorance, but would appreciate any suggestions and warnings re installing the inline filters for AT and PS I just got from IPD for the wife's 965 and my S70. Instructions on box start off with "install the filter", which unfortunately presumes more knowlege than I have at this point. PS lines do not appear as daunting as the AT, since the PS is hose, and the AT is metal. But I haven't the foggiest which way the flow go. Also would appreciate a current site address for getting the green books on either or both cars!

Thanks, all.

B D -

Go to www.volvocars.com/lit and choose the "Service" box. At one time, B4 I had an internetcapable computer, I could call 1-800-25-VOLVO and get the book people which are at Ken Cook company.

Good Luck,

Bob

:>)

Got 'em. Thanks.

Finding the place and room is the toughest for the power steering. This is just cutting out a section from the return line and clamping it into position.

Trany filter involves using a tubing cutter and taking a section out of the metal line going from the trany cooler back to the trany. Be sure to flare the cut ends just a little to help secure the hose to the tubing. I have had mine in for years and no problems.

Take your time and have fun!!

dick

Thanks. Also got email: magnefine has nice instructions and drawings at http://www.emergingent.com/installation_page.htm