Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine Cutting out 200 83

posted by  someone claiming to be Joe Anglim on  Mon Jul 23 12:20 CST 2001 [RELATED]

As of yesterday my 83 245 with the chrysler ign. has started cutting out. So far it has been happening at low rpm's - just around town. The tach drops instantly, seems to be at 0 before the engine has wound down. Each time it has restarted easily. I checked the 700 FAQ for ideas and it says the power stage and rpm sender cause this. So I guess the rpm sender = the hall sensor on mine, but I don't know if the power stage applies to my model.

I have replaced the wiring harnesses on this car so they are not at the top of my list of suspicions.

I plan to do some more checking in a day or two, but am wondering if anyone has any suggestions of likely faults.

Thanks for any suggestions.

Joe







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Engine Cutting out 200 83

posted by  someone claiming to be Rene Svastal on  Mon Jul 23 13:57 CST 2001 [RELATED]

Judging by the tach situation, I'm betting on the Hall sensor. I'm not familiar with the Chrysler system though, so I don't know other likely causes.

Rene






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.