Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2017 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C conversion to rotary style/?s 200 83glt

posted by  someone claiming to be RR on  Tue Aug 14 01:33 CST 2001 [RELATED]

Good morning all,

Ive got to replace my York on my 244 and have the unit from later 240 with all th brackets.Here's my question...

Do I need the p/s unit from the newer unit or can I just bolt the existing unit on top of the new rotary compressor.Uninstalling and installing the brackets and such is not that big of a deal,but swapping out p/s units seems like it might(fittings and all).

Thanks

RR







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: A/C conversion to rotary style/?s 200 83glt

posted by  someone claiming to be dick on  Tue Aug 14 05:18 CST 2001 [RELATED]

I have replaced a York with a rotary in the past. I did use a bracket designed to fit right where the York goes, so the only thing different was the belt length. I got the bracket from Hancock Industries. Did have to modify the bracket to get the proper tracking of the belt. Hose connections had to be modified. Believe it ended up being only one connection. Just takes some time and patience. You can get hancockindustries.com on the web to check it out.

dick






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.