Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

K and N conical filter 700 1990

I would like to replace my stock airbox and square airfilter with an aftermarket k and N conical filter and home jobber the heatsheild/airbox. What is the correct size to get for the K and N filter and is there a good internet source?








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

K and N conical filter 700 1990

There is a link to K&N on the brickboards link site.
http://www.brickboard.com/links








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

K and N conical filter 700 1990

Charles -
Summit Racing's website (www.summitracing.com) is a good source for K&Ns. There are several styles to choose from. As far as size goes, you probably want one with a 3-in. opening. The length of the filter will be up to you and the room you have - probably 5 to 6 inches. Check out K&N's website (there is a link to it on Summit's page). The K&N site will show you how the dimensions are measured on the filter (ie, flanges, diameters, etc.) and the corresponding part numbers for the type you need.
-Dave
--
1994 850 Bone Stock, 1988 745t a work in progress . . . http://communities.msn.com/Daves745tVolvoSite







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.