Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame trap PICTURE CONFUSION 200 1990

Model: 1990 240 DL Sedan

OK..OK..I know.. not another flame trap question! However, I found the trap and thought that I replaced it correctly but am confused by a diagram I later saw on the board.

This is what I did: Top hose connects to the housing with the flame trap(white plastic piece inside black housing "flame arrestor"?). Bottom hose (open) connects to oil seperator. Small hose from manifold to small stem piece on platic housing. Is this right?? If so, what is this picture all about. It would mean I have it upside down. Per the picture, the Flame arrestor/white piece/trap is son on the bottom hose to the breather box (or oil separator.) Am I missing something or misdefined the breather box. Help please. Thanks.

See Diagram: http://www.brickboard.com/RWD/index.htm?id=384844








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Flame trap PICTURE CONFUSION 200 1990

Sounds like you got it right.
Diagram is for earlier models( I have a '90 as well)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame trap PICTURE CONFUSION 200 1990

Thanks for the reassurance. I don't know how I could have messed it up condidering the 3 different sizes of hoses but you never know.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.