Just bought one, diameter 2 and 5/8 inch, and have just mounted it in the vent nearest the drivers window. Removed vent housing 1st obviously !!
It is such a brilliant fit, has anyone else tried this? Had any problems ?
Getting hooked up weds, can`t wait...
--
1989 744ti, turbo plus, turbo timer, exhaust mods

Please take a picture of this. I'm getting one of these soon and I'm still trying to decide where to mount it.

Thanks
--
Don Tibbetts; Living in the Florida Panhandle - soon to be known as Disney World North - The St. Joe Kingdom; 92 745T 94K mi

Hi Guys.. car sparky hopefully hooking up today..watch this post, will get some pics on it asap....
--
1989 744ti, turbo plus, turbo timer, exhaust mods

That's where I have mine.... :)

I used a guage surround from a 240T, but it's kinda falling apart (after 2 years) and I want to re-make it in wood, covered in black vinyl to match the dash...

What did you use?

-Paul Demeo
1990 780T

Hi Paul..

fits in the hole snugly top to bottom with no need for any thing else.
I`m going to make up a false panel from black plastic cut to shape to cover the small gap on the side and put it in place with double sided tape, have experimented with a cardboard cut out and it should look fine..

Cheers Mike
--
1989 744ti, turbo plus, turbo timer, exhaust mods

Could you please take a picture after you are finished and post it back here when you are finished.

I was about to buy the A Pillar for my boost gauge, but you placement sounds pretty good. I will wait to see what your set up looks like but going forward with my install. Thanks.