Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Intermediate shaft compatibility 200

posted by  joel142 on  Tue Sep 3 06:06 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


I'm in the begining throws of a 740 transplant (B230FT) into a 240 (B21) and I've started putting the parts together to move the distributor from the cam to the block.

One question that arose is can the intermediate shaft from the B21 be used in the B230 block? It has the gear teeth to drive the distributor and my Haynes books (take that with a grain of salt) indicate they have the same journal diameters and tollerances.

My big fear is I'll get them both on the bench only to discover one is 0.125" shorter than the other or the oil seal is a little different. If someone could clear this up I would really appreciate it.

Thanks

Joel





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intermediate shaft compatibility [200]
posted by  joel142  on Tue Sep 3 06:06 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.