Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2010 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

Sorry for bothering you guys with my engine wiring harness problems, but I have decided to purchase a new wiring harness. Can anyone recommend a reputable shop for the job in the Los Angeles area. My lease on my Jetta will be expiring and I am ready to roll with my 1986 240 Wagan. I love my Volvo!!!! The 240 body style is so timeless. Its my baby!!!! I hope it can get me back and forth to work. Please let me know which shop you recommend. Thanks for all of your help. This board is very very helpful!

tippi








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

    It's really not that hard. Lay the new wiring harness alongside the old one and do a one for one replacement. Save yourself aome money. You will need a few tools for the clamps, at least I did on my 740T. You will see there are four injector plugs which come up between the middle of the intake manifold, a couple in the head, the throttle stop switch and the oil pressue switch down low on the exhaust side.

    Do some practice runs and use colored tags or mail polish if necessary.

    Use an ohmmeter to check the connectors too.
    --
    Warren Bain - '86 744Ti M46 >290Kmi, '99 V70Glt > 45K mi, '96 965 >100Kmi Wifemobile near Manassas Va.. Check the 700/900 FAQ via the 'features' pull down menu.








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

      Except that the 240s have a narrower engine bay, meaning it will be loads easier if you pull off the well secured intake manifold. It's a shame that I only have one spare harness right now, since both of my 240s need one and the one with leaky front seals has the intake manifold off... oh well.

      - alex

      '85 244 Turbo
      '84 245 Turbo








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

      Thanks but no thanks. My car is going to a mechanic when someone recommends the right shop. God Bless!








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

        When I lived in LA, I had pretty good luck with Mark's Independant Volvo in Canoga Park.








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

          Hi I live in the LA area Orange county, and I am a fellow Jetta 1.8turbo owner .. if you need any help installing the wire harness (25bux sound fair)? hehe im only a 30min drive away and replaced\rebuild my wireharness in my 84 244turbo email- uSoSexyBaby@hotmail.com








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          Who Do you Recommend to Install my Engine Wiring Harness Next Week????? HELP!!! 200 1986

          thanks!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.