Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Motor mount 700

posted by  someone claiming to be db on  Wed Sep 10 06:28 CST 2003 [RELATED]

Can i get the passenger motor mount from the bottom or does it half to be from the top and therefore removing the fan?? The turbo makes it a tight fit indeed. Also anyone know the torque spec for the motor mount?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Motor mount 700

posted by  eadlermn on  Wed Sep 10 09:55 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Dec 7 11:59 CST 2010
[RELATED]

Assuming you have the hydraulic mounts:

There is one top nut, 17mm.
There are 3 for the bottom bracket (13mm) which you need to take off to get to the 17mm one holding the mount to the bracket. Two of the 3 are accessible from the top, the other from the bottom.

I don't remember the torque specs though...

-Eric
'89 765t, turbo coming back from being rebuilt, soon to be put in.
'72 BMW R75/5, alternate transportation (until winter or the 765 is up, whichever comes first)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Motor mount 700

posted by  Nmaslan on  Wed Sep 10 13:45 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 30 18:34 CST 2011
[RELATED]

Hi Eric,

Is what you describe applicable to a non-turbo with hydraulic mounts?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.