Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

88' 244, stalls in reverse and when going up hill... idea??? 200 1988

well i just got a 88' 244(auto) for free today. black w/ tan leather insides and only 101k on the clock... gonna pick it up as soon as they find the key

anyways point is about 6 months ago they parked it because it used to die when they would put it in reverse and then when going up hills it would stall .... SO ... hm ... any idea's??? what should i look for?? what are first things i should test?? and best way to test them??

thanks
mike








  REPLY TO THIS MESSAGE    PRINT   SAVE 

88' 244, stalls in reverse and when going up hill... idea??? 200 1988

Check the connections at the air mass meter (AMM) in the LF fender. If this plug is disconnected, or the pins are not making contact or the aMM is bad, it'll stall under heavy load.
I dealt with this for a month or two last year with an 87 244.... it hasn't reoccurred since fixing the AMM connection.
As for stalling in reverse, it did that too, and I can only suggest cleaning out the throttle body and setting the idle properly. If you've never done the throttle body, it's time. The 700/900FAQ has good details.
--
Rob Bareiss, New London CT ::: '87 244DL/M47- 221K, 88 744GLE- 202K, 91 244 181K, 88 244GL 145K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.