Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

wastegate Bypass Valve-when broken?-crazy glue...any ideas??? 700

Hey all

Where and what is the least expensive good fix for a Wastegate Bypass Valve.
i am told $100 U.S?
seems like a lot
is there some repair kit, Automotive Goop!

Thanks

image in Library








  REPLY TO THIS MESSAGE    PRINT   SAVE 

wastegate Bypass Valve-when broken?-crazy glue...any ideas??? 700

I had the same problem last year, after talking to my Volvo mechanic he gave me good advice. I used Crazy glue, no kidding, and today looks better than ever! But you have to do it carefully, detail work. Clean around, and then glue it. Don't spend money for something that will probably get broken again sooner or later. Good luck.

Constantin, 760 Turbo (1989)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

wastegate Bypass Valve-when broken?-crazy glue...any ideas??? 700

On my TD 04-12B Mit turbo the wastegate valve did not look repairable.
The two parts were held together by rolled over metal all the way around.
I was quoted a price of $3??-$400 for a new one. $100 doesn't seem too bad. You might do better at a junk yard.

good luck,
chuck
--
1988 745t 152k mi, 1995 945 111k mi







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.