Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2013 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

VOV Tabs 700 1989

posted by  spasske on  Sat Aug 28 03:54 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:11 CST 2014
[RELATED]

I'm installing a VOV in make AC and want to make sure I'm doing it right before I mess something up. The VOV has 4 tabs and the instruction says to break off ones to match the old valve. Am I correct that the bottom two tabs must be removed? It doesn't seem to go in all the way with all 4 tabs intact.

Also, do the orings on the valve get lubricated, too? I'm using nylog on the seals.
--
Paul NW Indiana '89 740 Turbo 110,000








  REPLY TO THIS MESSAGE    PRINT   SAVE 

VOV Tabs 700 1989

posted by  someone claiming to be Smitty on  Sat Aug 28 17:09 CST 2004 [RELATED]

I put the vov side by side with the one I removed on my 87 740. If I remember right, the two top tabs were extra and should have been removed.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.