Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2015 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Question on VX cam 200

posted by  someone claiming to be 240 owner on  Wed Sep 15 11:28 CST 2004 [RELATED]

How can you really tell if you have a VX came. I have a VX cam and the only markings are VX scratched on the back of the cam. Any other marks? Also what are the clearences when installing the cam and using the offset tool with the shims?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Question on VX cam 200

posted by  richink on  Wed Sep 15 12:49 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Dec 22 04:40 CST 2010
[RELATED]

Hello,

Yep that's about it. Neutral clearances are the same on the VX as with any other Volvo cam so checking clearances after installation is recommended but not neccessary. The other thing I noticed was that my old M cam didn't fill up the box that the VX came in...

--
Happy Bricking!!! - Richard - '87 245 DL , '82 242 GLT - Half a million km between them!!!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.