Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2023 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Hard Shifting 200

I recently purchased my third volvo, 1992 244 DL 5Speed (my first Volvo manual tranny), and everything is going great except when I try to put the car in reverse after driving in the forward gears (obviously after coming to a stop) I cannot engage third. The gears just spins and makes that terrible grinding noise. Note: this does not occur everytime I shift into reverse, it seems sporadic.

Also, sometimes at stop lights or in traffic if I disengage the car from gear it's often difficult to get back into first. Since I'm not a fan of forcing the car into gear I was wondering if anyone else has had these problems, what they were and how they were fixed?

Thanks,
Dan








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Hard Shifting 200

    Dan, I have the same problem, though maybe not as severe. From N to 1 and 1 to 2, it's all jerky. I think someone here suggested it might be the synchro gears. My reverse is a bit sticky sometimes, but I just make sure I have the lockout collar pulled all the way up the gearshift and try it again; sometimes it helps, sometimes not--in which case I just sorta force it.

    Anyway, I'm taking it in tomorrow and will let you know what my mechanic says.
    --
    John--'88 244DL, M47, 102K







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.