Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Nissens Radiator Drain Plug - o-ring replacement? 900 1994

posted by  Bean on  Fri Dec 10 05:02 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 30 03:53 CST 2010
[RELATED]

Does anyone know where to get replacement rubber o-rings/seals for the drain cock on the Nissens radiators?

I drained the coolant for the headgasket repair, upon coolant refill the rubber gasket must have been off center when I tightened the plug. This resulted in a torn gasket. Was able to find a drain plug at Pepboys, the plug didn't fit but the gasket on it was almost the right fit, enough so that the radiator didn't leak.

I want to replace the gasket with the proper one since I see a slight leak there, it's holding coolant but am afraid I'm on borrowed time.

Thanks,
Bean
--
'80 242GT 93k, '94 945T 139k, '89 765T 68k (new '94 B230FT)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Nissens Radiator Drain Plug - o-ring replacement? [900][1994]
posted by  Bean  on Fri Dec 10 05:02 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.