Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 140-160 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Brickme and Harv megasquirt update? 140-160

have either of yall made any more progress on the megasquirt installs?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Some progress, I made up my surge tank 140-160

and I still need to make up some offset washers for my intake and headder connection since they are different thicknesses.


John
--
"After that last stage my tyres are really shaged out!" Peter Solberg








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Some progress, I made up my surge tank 140-160

A local machine shop can mill down the offending "tall" mounting ears on your manifold or you can DIY with an angle grinder and file for finishing.

Mike!
--
Mike!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

I thought of that but... 140-160

I was thinking that the manefold doesn't look all that thick in other places and I am concerned about it cracking. I might not be able to use the manefold support brace with my headder.
I'll figure something out.

John







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.