Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hood release cable loose, adjustment screw? 200

posted by  Trev29 on  Tue Dec 28 11:01 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

Check the cable in the engine compartment where it is held down by clamps. It may have moved toward the passenger compartment from constant tugging. If it has moved, you need to pull the outer cable sheath back into position and reclamp.
--
1980 245 Canadian B21A with SU carb and M46 trans






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Hood release cable loose, adjustment screw? [200]
posted by  someone claiming to be Jaymes  on Tue Dec 28 04:45 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.