Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B23 engine parts needed for an '83 240

posted by  volvo245kit on  Fri Mar 25 15:45 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 30 20:54 CST 2011
[RELATED]

I am converting a diesel wagon to a gas engine setup and am in need of the following parts for a 1983 B23 engine: timing belt cover, the air intake and duct to the airbox, the duct from the airbox to the airmass meter, the duct from the airmass meter to the throttle body, an ignition wiring harness (updated version) sparkplug wires including the coil wire. Please let me know if you can help. Thanks, Charles








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    B23 engine parts needed for an '83 240

    posted by  volvo245kit on  Fri Mar 25 16:36 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Sat Apr 30 20:54 CST 2011
    [RELATED]

    I forgot to mention that the ignition wiring harness has to be the one for a bosch distributor. Some of them had bosch and some of them had chrysler distributors. Thanks, Charles







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.