Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Regina O2 Sensor Connection 700 1989

Hello,

On my 1989 740 Regina FI System, where does the O2 sensor connect I follow it into the wiring harness after that i get lost where do I look?

JOhn








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Regina O2 Sensor Connection 700 1989

If you're looking for the connectors, they're under the brace that runs from the right strut to the firewall, look for a thick green wire leading into the harness. That's the ECU side of the signal wire. I believe the heater wires are both red, running to a separate connector.
--
Chris, Dartmouth NS Canada 70 M-B 280SE, 83 245DL, 84 244 turbo, 90 780 turbo, 92 VW Golf








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Regina O2 Sensor Connection 700 1989

I haven't traced that through but here is a wiring diagram which might help. Scroll down to the Regina section. It's for the B234 engine but I'd bet the circuit is the same.

http://www.autoelectric.ru/auto/volvo/740/1989/740-89.htm







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.