When I took the motor out I neglected to mark ALL the wires. I need some help determining:
Where the ignition wire goes (the one coming out of the armored cable following a Crane's electronic conversion). I'll guess it's +coil, but will await your response.
Reverse light wire. Does it connect to fuse #4? Again, I'll wait.
Many Thanks.

Yes the ingition wire goes to + side of the coil, along with the red wire from the Crane unit. In my case the ignition wire goes first to a resistance ballast first and them to the coil, since my coil doesn't built-in resistance. You will have to do this too, unless you have built-in resistance on the coil.
Tom