Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2012 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

starter solenoid failure, and locating the starter service connector 900 1993

posted by  darmstrong on  Sat May 28 00:36 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 13 12:21 CST 2014
[RELATED]

I was surprised that my starter solenoid failed without a hint of a warning. Worked perfectly every time, then nothing. Pulled the starter, and "bench tested" it against the rebuild, and sure enough, that was it. I know the Bentley 240 manual talks about a solenoid replacement, but I don't know of any place that does anything but a full rebuilt starter. At any rate, I got a 3 year warranty on the rebuild, so that's not bad ($150 CDN with core at Canadian TIre).

In the process, I couldn't find the starter service connector. I believe that the wire is supposed to be pink. On my 200, it hangs off the 8-pin grey connector on the firewall. Can someone direct me to where it is on the 940?


Thanks.

--
David Armstrong - '86 240(350k km?), '93 940T(270k km), '89 240(parts source for others) near Toronto






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New starter solenoid failure, and locating the starter service connector [900][1993]
posted by  darmstrong  on Sat May 28 00:36 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.