Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230f Oil Pressure Gauge 200

posted by  someone claiming to be Flyboy on  Thu Sep 1 18:01 CST 2005 [RELATED]

For any of you thinking about installing the stock Volvo oil pressure gauge, Here`s what you need to know. The stock oil sender for the B230f uses a 14x1.5 mm straight thread pitch. All the other motors use a 1/8x27 NPT thread pitch. If you want to install a Volvo oil pressure sender in a B230f engine. You will need to get a 14x1.5 mm straight thread adapter with an 1/4 NPT pipe thread female end and sleeve it to accept a 1/8x27 NPT into which you can screw in the oil pressure sender. Make sure the sender says for 0 to 5 bar on it and use a 5 bar gauge.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230f Oil Pressure Gauge [200]
posted by  someone claiming to be Flyboy  on Thu Sep 1 18:01 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.