The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230f Oil Pressure Gauge 200

posted by  someone claiming to be Flyboy on  Thu Sep 1 18:01 CST 2005 [RELATED]

For any of you thinking about installing the stock Volvo oil pressure gauge, Here`s what you need to know. The stock oil sender for the B230f uses a 14x1.5 mm straight thread pitch. All the other motors use a 1/8x27 NPT thread pitch. If you want to install a Volvo oil pressure sender in a B230f engine. You will need to get a 14x1.5 mm straight thread adapter with an 1/4 NPT pipe thread female end and sleeve it to accept a 1/8x27 NPT into which you can screw in the oil pressure sender. Make sure the sender says for 0 to 5 bar on it and use a 5 bar gauge.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.