Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

position of trigger wheel relative to TDC - installing flex plate b230ft 700 1990

posted by  Vroom on  Wed Sep 14 01:06 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am installing a rebuilt '89 (LH 2.2) motor in a '90 760 (*LH 2.4)

I need to know the correct position of the break in the window relative to TDC.

When I removed the flex plate from the '90 engine I was absolutely sure that the break in the windows was aligned with the sensor when the notch in the front crank pulley was lined up with the mark on the belt cover. I haave received info that is contrary to this position.

How should the trigger wheel/ring be lined up relative to TDC?

Thanks
--
89 765 w/2stage boost (TO.)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New position of trigger wheel relative to TDC - installing flex plate b230ft [700][1990]
posted by  Vroom  on Wed Sep 14 01:06 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.