Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

stripped exhaust manifold stud 200 1982

posted by  taking8 on  Fri Sep 16 22:14 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm in the process of replacing the headgasket in my '82 244GLTic (my first time, hints/good ideas from more experienced brickboarders would be appreciated!) and I just stripped the upper exhaust manifold stud closest to the firewall. It didn't have a washer on it, and the stud and nut are rusted together. What's the best way to go about this? I have a road trip coming up (like tomarrow) and I figure if I have to, I can just leave that stud/nut out, and fix it later, but since I'm pulling the head,it would be way easier now. any ideas?
thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New stripped exhaust manifold stud [200][1982]
posted by  taking8  on Fri Sep 16 22:14 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.