Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2016 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing blower motor with a S-10 unit: several questions 444-544

posted by  someone claiming to be Buz on  Tue Sep 20 10:54 CST 2005 [RELATED]

I saw a discussion a while back about using a S-10 blower in a PV and have a couple questions for anyone who might have done it. Does the squirrel cage work too or just the motor? How about the mounting plate, should I think about using the original plate or fabricating something new? From what I've seen it looks like the Chev unit is basically a 1 speed unit that is controlled with a resistor block. Does that mean that I might be able to use the original 445 resistor switch? The S-10 has a rubber tube from the motor to the plenum that I would assume is for cooling. If so, how necessary is it? Much thanks for any advise.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing blower motor with a S-10 unit: several questions [444-544]
posted by  someone claiming to be Buz  on Tue Sep 20 10:54 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.