Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear cam seal update, with pictures. Tell me if i'm correct. . . 200

posted by  kraynek, back in CO on  Wed Sep 21 11:45 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 15 03:43 CST 2008
[RELATED]

i pulled the valve cover gasket off to replace the rear cam seal. the cam seal isn't even loose, but i found what i think was the leak. it's an oily spot on the valve cover gasket, with a corresponding spot on the head. think that could leak out a quart of oil over 4 hours?

if the rear cam seal is solidly in place, do i bother replacing it? If so, how do i get it out? it doesn't feel like it's moving. and don't worry, the cam seal retainer will be installed (properly, since it wasn't last time)

i'll get the pictures put up later. . .my computer's not liking me right now. the oil spot on the gasket/head can't be larger than a dime.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear cam seal update, with pictures. Tell me if i'm correct. . . [200]
posted by  kraynek, back in CO  on Wed Sep 21 11:45 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.