Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2021 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

oil temp sender 200 1986

posted by  someone claiming to be chris with an '86 245 on  Fri Sep 30 05:19 CST 2005 [RELATED]

i recently got a whole gauge set out of a car in the boneyard. fuel economy, volts, and oil temp. i of course grabbed all the wiring and senders while i was at it and installed them...i realized i was leaking oil the other day and took a look to find that my oil temp sensor (which is a drainplug with a sensor in it) had a crack in the center where the wire connector comes out and oil was dripping through this crack.. is this something that i could take out, clean and possible solder back together? or do i need to find a new one? i've called the local import place and done searches through ipd, overnightautoparts.com and ebay to find nothing. does anyone know where to get one of these sensors if that is what i need? Thanks in advance






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil temp sender [200][1986]
posted by  someone claiming to be chris with an '86 245  on Fri Sep 30 05:19 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.